KPSC Mock Test: Moulder - Kerala State Water Transport Department
Official Kerala Public Service Commission ONLINE Exam Question Paper & Answer Key. • Name of Post: Moulder - Kerala State Water Transport Department • Department / Institution: Cat.No : 094/2023 • Question Paper Code: 18/2024/OL • Answer Key: Final Answer Key Question Paper PDF: https://www.keralapsc.gov.in/sites/default/files/2024-02/PRO.pdf Answer Key PDF: https://www.keralapsc.gov.in/sites/default/files/2024-03/final_answer_key__moulder.pdf
100 Questions
Progress: 0 / 100 Answered
1
Swage blocks are made out of
2
The beak of anvil used for
3
PPE 5 stands for
4
ABC stands for
5
Class C fire is used for
6
The fuel used in a blacksmiths hearth for hand forging is
7
The function of fuel in forging is
8
The anvil is made out of
9
The anvil is used for
10
The usage of grooves and slots provided on the swage block
11
Tongs are used for
12
Flat tongs are used
13
The specification of hammer is
14
The weight of hammer is stamped on
15
The slight convexity is given to the cutting edge of the chisel is
16
The clearance angle of a chisel is the angle between
17
The pitch of the wave set blade is
18
Hacksaw blades are specified by
19
The angle of centre punch is
20
The angle of dot punch is
21
The tool used to measure length in forging shop is
22
The tool used for transferring and stepping off distances
23
Files are classified according to their
24
The second cut file is used for
25
In double cut file, the overcut is
26
The file used in cases where there is a heavy reduction of metal is
27
The other name of jenny caliper is
28
Bench vice is made of
29
The included angle of VEE in v-blocks is
30
The accuracy of trysquare is
31
"Never lean on the machine" is comes under
32
Which of the statement mentioned is not correct ?
1. Do not give an unconscious person any food or drink
2. Splash water on the face of the unconscious person
3. Do not leave the person alone
4. Do not place a pillow under the head of the unconscious person
33
Unguarded machinery is a
34
The three factors of collision causes are
1. Roads
2. Vehicles
3. Pedestrians
4. Drivers
35
A material which can permanently be extended in all directions, the material is said to be
36
Because of the __________ content, cast iron provides an excellent bearing and sliding surface.
37
The ultimate tensile strength of wrought iron is about
38
In cartridge brass the percentage of copper and zinc is
39
Which comes under chemical occupational hazard ?
40
What is the use of strike-off-Bar ?
41
What is the purpose of make denseners by same metal of casting ?
42
What is the abbreviation of OSI related to network system ?
43
In admirality gun metal the percentage of Tin is
44
The solid solution of carbon in gamma iron are called
45
Composite materials are classified according to
46
When sand is in its natural moist state it is known as
47
The heat treatment process which is used to increase the toughness and to reduce brittleness is
48
Which of the following cast iron cannot be machined ?
49
The purpose of adding wood flour to moulding sand is to improve
50
Which of the following is not a defect if permeability is not enough ?
51
The bottom of cupola is made up of which material ?
52
Which is used for general purpose grinding of tough materials ?
53
The manufacture has marking on a grinding wheel as 'A36L5V'. The code 'V' represents the
54
Which is the fuel of cupola furnace ?
55
Which metal is used for making metal pattern ?
56
Which of the following is the most pattern materials are corrosion prone ?
57
A pattern carries which allowance for internal and external surfaces ?
58
What is the use of core ?
59
What is the colour code of bins for waste paper segregation ?
60
Which pattern allowance used for finishing the casting ?
61
Which material is used for making pattern for mass production ?
62
Which is made out of the same pouring metal ?
63
Which is used for uniform rate of cooling of a casting ?
64
What is the advantage of open sand mould ?
65
Which is used for assemble the split core box ?
66
Which metal is used for making permanent mould ?
67
Which property of moulding sand is used for make the mould number of times ?
68
What is the advantage of machine moulding ?
69
Which gate is called parting line gate ?
70
Which tool is make the pierced venting in core ?
71
What is the advantage of stack mould ?
72
Which gating system is used for thin section castings ?
73
What is known as middle box of three box mould ?
74
Which is used for withdraw the huge patterns from mould ?
75
What is the purpose of true centrifugal casting ?
76
Which material is used for make the mould in continuous casting process ?
77
Which property of moulding sand that particles of same attracting each other ?
78
Which material is makes for chill ?
79
Which mould process the entire mould is prepared with the help of manpower ?
80
What is the reason for using the fine sand to make the mould ?
81
Match List I with List II and select the correct answer from the codes given below.
| List I | List II |
| :--- | :--- |
| (a) India's fastest flowing river | (i) Brahmaputra |
| (b) The red river in India | (ii) Gaumukh |
| (c) The site of harappa is located on the banks of river | (iii) Teesta |
| (d) The Ganges river originates | (iv) Ravi |
82
The idea of 'trusteeship' is associated with
83
The first district in India without any poor residents as per the latest Multidimensional Poverty Index (MPI) released by the NITI Aayog (2021)
84
Which pairs are incorrect ?
a. Atmanuthapam - Kuriakose Elias Chavara
b. Nijananda Vilasam - Kumaranasan
c. Gajendramoksham Vanchippattu - Sree Narayana Guru
d. Lankamardanam - Nitya Chaithanyayathi
85
There are four main kinds of soil that can be found in Kerala, which among is most fertile ?
86
The primary objective of the SGRY Scheme is
A) To provide additional and supplementary wage employment and thereby provide food security and improve nutritional levels in all rural areas.
B) To provide rural people with the right to document their residential properties so that they can use their property for economic purpose.
C) To provide pucca house to all who are houseless and living in dilapidated houses in rural areas.
87
Which of the books is not correctly matched with the Author ?
Author Book
A. Mahatma Gandhi - Hind Swaraj
B. Dadabhai Naoroji - Poverty and Unbritish Rule in India
C. Adam Smith - Principles of Economics
D. Karl Marx - Das Capital
88
Consider the following statements related to Western Ghats and select the incorrect statement.
A. The mountain ranges run parallel to the Bay of Bengal.
B. The Anamudi peak is the highest peak in the Western Ghats.
C. The Western Ghats also known as the Sahyadri mountain ranges.
89
Which of the following country has hosted the Commonwealth games maximum number of times ?
90
Match List I with List II and select the correct answer from the codes given below.
List I List II
(a) Vaikunta Swamikal (1) Atmavidya Sangham
(b) Brahmananda Sivayogi (2) Araya Samudaya Sanghatana
(c) Pandit K.P. Karuppan (3) Samatva Samajam
(d) Vagbhatanandan (4) Anandamahasabha
91
Arrange the following in chronological sequence and select the correct answer from the codes given below.
1. The Khilafat Movement
2. The Quit India Movement
3. Swadeshi Movement
4. The Civil Disobedience Movement
92
The highest literary honour is given by the Kerala Sahitya Akademi, Government of Kerala
93
Identify the Jet stream which is responsible for bringing western disturbances from the Mediterranean region into the Indian subcontinent.
94
Which of the Movement is correctly matched with the Reformers ?
Movements Reformers
A. Prardhana Samaj - Atmaram Pandurang
B. Satyashodak Samaj - E.V. Ramaswami Naicker
C. Self Respect Movement - Jyotiba Phule
D. Hitakarini Samaj - Viresalingam
95
Which among the following statement is associated with KIIFB ?
A. A government owned financial institution to mobilize fund for infrastructural development.
B. A government agency for empowering industrial growth across Kerala.
C. To provide investment for projects in the state of Kerala in the sectors of irrigation, road, power, water supply, ports etc.
D. If provides support to businesses, export-import facilities etc.
96
Match Column A with Column B.
Column A Column B
a. Santhal Rebellion (i) Malabar
b. Bhil Uprisings (ii) Ranchi
c. Munda Uprisings (iii) Rajmahal hills
d. Kurichya Rebellion (iv) Mangad hills
97
With respect to "Nai Talim" consider the following statements.
A. Mahatma Gandhi's perspective of education is known as Nai Talim.
B. This system of education recommended free and compulsory education in mother tongue.
C. Implemented three language formula.
D. Education should be related to some productive occupations.
98
With reference to the project 'Veda' consider the following statements.
A. The Veda SLV is a three stage, solid-propellant rocket.
B. 'Veda' means vehicle for Defence Application.
C. The Veda vehicle is intended for launching defence satellites into a lower orbit.
Choose the correct answer from the codes given.
99
India's first Science city
100
Which sports event is known as the "BWF Super Series" ?
💡 Answer all questions to view your final scorecard.