PSC Buddy
KPSC-MOCK-TEST Mock Exam

KPSC Mock Test: Tractor Driver - Ground Water

KPSC Mock Test: Tractor Driver - Ground Water

Official Kerala Public Service Commission ONLINE Exam Question Paper & Answer Key. • Name of Post: Tractor Driver - Ground Water • Department / Institution: Ground Water  Cat.No  395/2020 • Question Paper Code: 97/2023/OL • Date of Test: 27-06-2023 • Answer Key: Final Answer Key Question Paper PDF: https://www.keralapsc.gov.in/sites/default/files/2023-07/pky-97-23.pdf Answer Key PDF: https://www.keralapsc.gov.in/sites/default/files/2023-09/final_answer_key__tractor_driver.pdf

100 Questions
Progress: 0 / 100 Answered
1
Currency of a learners licence is __________
2
Which of the following is not a transport vehicle?
3
Minimum age to obtain a learners licence for motor cars is
4
Minimum learning period to attend practical test on driving is
5
The colour of the registration number plate in Battery operated Electric Motor car
6
Time limit prescribed in M.V. Act, to apply for transferring an insurance Certificate, from the date of transfer is
7
Maximum gross vehicle weight of a light motor vehicle is
8
Maximum validity of Goods Carriage Permit is
9
Registration validity of a Motor Car is
10
Pollution under control certificate is compulsory for all vehicles, after completion of ______ period from the date of registration.
11
Maximum speed limit of a Heavy Goods Vehicle at school zone is
12
A vehicle shall not be parked
13
The passenger capacity of a Tractor other than driver is
14
Maximum speed while towing a vehicle shall not exceed ____________ km/hr.
15
Distance to be maintained with a vehicle moving in front of our vehicle is
16
A red coloured octagon is sign for
17
On mountain roads and steep roads priority is for ________
18
________ indicates to slow down and proceed with caution.
19
The driver shall switch on the _________ before entering a tunnel.
20
The driver of a non-transport vehicle shall always carry with him in physical or electronic form
21
Broken white lines along the centre of the road means
22
Continuous yellow line along the centre of the road is
23
Most dangerous line is
24
Zebra-crossing is a
25
White line along the side of the road is known as
26
Yellow line along the side of the road for
27
Which of the following statement is/are correct about ladder hatchings? (i) Marking at the centre of the road in the shape of a ladder (ii) Used as divider in dangerous areas (iii) Over taking is prohibitted
28
On yellow box marking
29
Diagonal marking on the road is for indicating?
30
Zig-zag road markings (i) School/hospital zone (ii) Careful for side entering (iii) Follow speed limits
31
Traffic signs are mentioned in which schedule of the motor vehicle Act?
32
How many types of traffic signs are mentioned in Motor Vehicle Act?
33
Which is the signal operated by Land only?
34
Shape of cautionary sign is
35
Give-way sign is R ___________ sign?
36
Design of stop sign is?
37
Informatory sign is
38
T-junction, Y-junction, X-junction comes under
39
Which is a mandatory sign?
40
Violation of mandatory sign is
41
A pressure cap is used instead of a normal cap in radiator to attain: (i) To increase system pressure (ii) To hold the cap tight (iii) To increase boiling point of Coolant. (iv) To maintain the system leak proof
42
Tractor is a vehicle
43
Psi in tyre pressure means
44
Advantages of Disc Plough are: (i) Useful on hard surfaces with rocks (ii) It cuts, lifts and inverts the soil (iii) Covers the area in a faster speed (iv) Digs Deeper
45
Which part in a single point Hitch takes care of variations in field condition?
46
Which of the following are good characteristics of brake fluid? (i) Anti Corrosive (ii) Evaporative
47
What will happen if an engine run without Air filter/Cleaner?
48
Coolant is to be replaced-
49
The Unit supplies rotary power to stationary machines from a tractor is-
50
Rota Tiller is being driven by _____________ in a Power Tiller.
51
For cutting thin tubing, the most suitable pitch of the hacksaw blade is?
52
The cutting angle for chipping iron is?
53
Proper leverage is provided to the engine output to pull the vehicle load by ___________
54
Components of clutch disc which absorbs frictional vibrations during torque triangular?
55
The pressure o fluid in hydraulic brake system is governed by?
56
Axle half shaft is splinted into
57
The starter armature rotates due to magnetic pole
58
The current regulator winding is connected with dynamo's armature
59
The high fuel consumption of a petrol engine may be due to
60
Adjusting screw for adjusting air pressure in tank is provided
61
The fluid pressure in master cylinder depends on
62
The step bore wheel cylinder, uses two rubber cups of
63
The angle between centre line of king pin and a vertical line from centre point of tyre is called
64
In which type of steering gear box variable steering ratio is achieved?
65
Complete vehicle without body is called as
66
Air bleeding is done in hydraulic brake is to?
67
CRDI stands for _________
68
Suspension component which control the vibration of suspension springs
69
T urbo charge is equipped for _________
70
Reduction catalyst used in a catalytic convertor is
71
In a hydraulic brake system the fluid pressure is converted to mechanical movement by
72
Which is the important part for locking the hitch pin?
73
In disc harrow the function of scraper is to?
74
Which part of the farm tractor takes care wide range of variation in the field condition?
75
Which materials used to make micrometer anvil?
76
Who is the issuing Authority of driving licence in Kerala?
77
Which of the following tool is used to remove a broken stud?
78
Which of the following tool is very necessary for engine assembling?
79
In the following what instrument is used to measure the current flow from battery and viceversa?
80
Which of the following instrument is used in a vehicle to measure the travelled distance?
81
What is the expansion of "SMF" battery?
82
In the following Jacks what type is commonly used for cars?
83
What is the function of Air cleaner in a vehicle?
84
What pollutant contained in the exhaust gas is mostly not harmful for human?
85
Which of the following part is not an internal part of engine?
86
Premium type gasoline fuel having
87
CRDI stands for
88
Which of the following is not a reason for high oil pressure of engine?
89
Which one of the following is the best spark plug for the engine?
90
Which of the following is not included in the Unsprung weight of a Vehicle?
91
An over inflated tyre will wear the tread most near the
92
Braking is produced by the frictional effect between the breake drum and
93
Front wheel alignment is adjusted by altering
94
Which transmission unit disengages the drive and provides a smooth take up of the drive?
95
The output of an alternator is controlled by
96
Crash sensors are located
97
In an EFI system which of the following statement is true?
98
What is the function of DTC?
99
________ prevents someone from starting the engine with an incorrectly coded key.
100
Which sensor measures the presence of oxygen in the exhaust system of a car?

💡 Answer all questions to view your final scorecard.